Development trend of automatic polishing machine

Mr. Yamazaki Takatsugi, Executive Director of Yamazaki Mazak Company, Japan, explained the 7 intelligent functions of Mazak machine tools, namely: 1. Intelligent spindle monitoring function; 2. Intelligent thermal displacement compensation function; 3. Intelligence Intelligent maintenance and monitoring function; 4. Intelligent vibration prevention function; 5. Intelligent interference prevention function; 6. Voice navigation function; 7. Intelligent balance imbalance detection function. The same automatic polishing machine development trend 1: Technological innovation and productivity, Bob Simpson, chairman of the American Manufacturing Technology Association, believes that the turmoil in the world financial market has threatened the market's demand for manufacturing technology, thus ending the four consecutive years of growth in the US manufacturing industry and also affecting the world's manufacturing industry. The post-grinding surface is as bright as a mirror, and no scratches can be seen under the bright field of the microscope, but the wear marks are still visible under the phase contrast illumination. Because of this, the operation method of the equipment has also attracted the attention of many people. Many people hope to think about this part of the situation more seriously and get a better answer. The above is a detailed introduction to the automatic polishing machine.

   When you understand this product, you can pay attention to it. It is very important to better adjust this product before using the automatic polishing machine. After the adjustment is completed, you can complete the work very well in the actual work process. When there are too many polishing pads that cannot be cleaned, it can be understood from the polishing effect with timely replacement. It is directly related to the material to be polished. The material is different, and the polishing result is naturally different. It should be considered that the basic quality of the operating staff is a very important part, and only the staff can be better guaranteed in terms of quality, so as to ensure the safety during the operation.

 After rough polishing, the grinding surface is smooth, but dull, and there are uniform and detailed wear marks under the microscope. It needs to be eliminated by fine polishing. The polishing methods of the automatic polishing machine are very diverse and have more advantages than manual working processes. The polishing angle and the polishing The quantity and accuracy can be adjusted. The adjustment of different procedures meets the corresponding work requirements. The pass rate is very high and the consumption is very low, which saves a lot of costs and avoids affecting the development of the enterprise. When the continuous working time of the polishing machine is too long, The polishing roller has a high friction and heat generation temperature, which is easy to scald the leather surface. It needs to be cooled down and then operated as an automatic compensation device. The polishing wheel will have a large loss after a long period of grinding. The main manifestation is that the diameter of the polishing wheel becomes smaller. The system can automatically adjust the distance between the polishing wheel and the surface of the polishing product, increase the usage rate of the polishing wheel, and reduce the frequency of manual replacement of the polishing wheel.