Dongguan Kehong Grinding Technology Co., Ltd.Welcome!
产品展示
Dongguan Kehong Grinding Technology Co., Ltd.
Address: Building 3, South District, CIMC Digital Industrial Park,
Yile Road, Songshan Lake, Dongguan City
Tel: 0769-23834689 23835689
Fax: 0769-23326189
QQ: 1820748313
E-mail: kehong188@163.com
Credibility:
Sales call: 13392375668 Check Health
After-sales phone: 13392342668 Pinggong
1. Before installing the robot polishing machine, first check the internal device connection.
2. Before powering on the equipment, the following work should be done:
3. Make sure that the grounding wire is connected correctly and the installation resistance is less than 10 ohms.
4. Check whether the fasteners are loose during transportation.
5. The machine must be installed on a level ground with a shock-proof rubber sheet or fixed on the bottom plate of the polishing workstation.
6. Recheck whether the connectors are connected reliably.
7. Connect the power supply, turn on the power switch key, start the motor, observe the rotation of the motor, and change the power connection if it does not meet the process requirements.
8. After the equipment is shut down for a long period of time, the equipment must be started again for sufficient lubrication.
9. Test machine: After the equipment is installed, the initial test machine should be very cautious. The test machine time is about 1 hour, and heavy-duty cutting and processing of oversized parts are not allowed during the whole test machine period.
Dongguan Kehong Grinding Technology Co., Ltd.
Address: Building 3, South District, CIMC Digital Industrial Park,
Yile Road, Songshan Lake, Dongguan City
Tel: 0769-23834689 23835689
Fax: 0769-23326189
QQ: 1820748313
E-mail: kehong188@163.com
Credibility:
Sales call: 13392375668 Check Health
After-sales phone: 13392342668 Pinggong
Scan to open the mobile terminal