Grinding wheel type: sandpaper wire, flat wire, straight wire general

Grinding wheel mesh number: 60-1200 (optional, common for flat wire and straight wire)

Grinding wheel diameter: 350

Shaft diameter of sanding wheel: 32

Grinding wheel thickness: 200-300 (optional)

Speed: 0-1800/min

Equipment introduction:

The equipment is designed to remove burrs on flat workpieces. Because the equipment adopts linear processing, it can remove burrs on the outer surface of the workpiece at one time. It can also chamfer, deburr, and polish (non-mirror) on the surface of the workpiece according to customer requirements. Various equipment The parameter setting can be modified at any time on the operation panel. Except for manual loading and unloading, the rest of the work can be completed automatically, because the equipment adopts assembly line processing, which has a short cycle period and high processing efficiency.

Features:

1. There is no cutting on the front of the product when deburring, and the product size is not affected.

2. For magnetic products, you can choose to use magnetic adsorption, which can greatly reduce equipment energy consumption.

3. This machine uses common consumables in the market, no special customization or purchase by designated suppliers, which greatly reduces the user's cost.

4. The equipment is equipped with a dust removal interface, which can suck away the metal dust generated when the equipment is working, and ensure a clean environment in the working area.

5. Through the revolution and rotation of the grinding wheel, the surface contour of the workpiece is polished and deburred at 360° without dead angle, so that the burr is removed evenly and the contour edge is smoother.

Grinding wheel type: sandpaper wire, flat wire, straight wire general

Grinding wheel mesh number: 60-1200 (optional, common for flat wire and straight wire)

Grinding wheel diameter: 350

Shaft diameter of sanding wheel: 32

Grinding wheel thickness: 200-300 (optional)

Speed: 0-1800/min