Importance of polishing machine

From the industry information of the polishing machine, we can realize that this has indeed become a national science and technology project with a better utilization of each part, such as the "sixth five-year plan", "seventh five-year plan", "eighth five-year plan" and "ninth five-year plan "In the arrangement of key projects and the re-validation and design review of the Three Gorges Project, the application of surface engineering has always been one of the important topics of research and discussion. Taking into account the related issues of every aspect of the polishing machine, people can also understand the effect of this kind of equipment in dealing with shallow marks. The effect is also very good.

    Therefore, it can be said that surface engineering promotes nanotechnology, especially one of the main forces in the development of nanomaterial structure. In order to have a better understanding of the various parts of this kind of equipment, the operation content of the polishing machine equipment is also very important. , Polishing machine operating procedures 1. Before polishing, it is necessary to remove the ground garbage, debris and sand, etc. 2． Check whether the polishing brush of the polishing machine is clean and whether it is replaced, 3． Check whether the controller of the adjustment key is in the normal speed position. 4． Connect the power source, the operation should start from the place closest to the power source, turn on the machine and let the machine run at high speed, and then stick to the ground for polishing. The walking route is a straight line, and the back polishing position should overlap the front polished ground. 3. Notes for polishing machine 1. Do not drive the machine too fast to avoid collision. 2． Do not operate the machine in a flammable and explosive atmosphere 3． Do not raise the operating lever during operation, as this will cause the machine to lose control. 4． Do not press things on the machine, because it has a precise balance range. When the operating lever needs to be moved during operation, all wires must be moved first. The ground wire must be connected to the switch box motor. Wrong connection will result in electric shock. 4. After the polishing machine is maintained and used, remove the needle holder and polishing pad and clean the surface and parts of the machine with a clean cloth. When not in use, use a useless The pad is placed under the drive plate for protection. Check whether the air vent of the motor cover is unblocked. If the dust is thick, the motor housing must be removed, and all the dust must be removed with a vacuum cleaner. The wheel bearings must be frequently lubricated. Anti-rust, complete overhaul every time.

    And when paying attention to the operation of the polishing machine, you should pay attention to it. It is important to be able to do the relevant protection work, so that the safety during the operation can better guarantee the disc polishing machine is used to polish and polish the surface of the object. You can choose according to the grinding needs High-speed, low-speed, painful and non-partial polishing. Commonly used abrasives include emery cloth sheets, vegetable melon cloth sheets, wool balls, and sponge balls, so that you can better understand the main accessories of the polishing machine, but from the actual materials It can be understood that polishing discs are often divided into materials such as wool, sponge and rabbit hair. In the selection process, making a suitable choice according to actual needs has become a very necessary thing. This should be considered more seriously. Part of the content.